customwholesaleblinds.com Vertical Measuring Worksheet


Print this page
Product: __________________________________
Room Name: ________________________________
Quantity: _____
Width: _______ by Height _______
Louver Color: _____________________________
PVC Back Color (optional): ________________
Mount: ________________ (inside or outside)
Stack Option: ________ (left, right, split)
Brackets: ____________ (regular, extension)
Valance: _______________ (none, 3 1/2", 7")
Valance Corners: _______ (squared, rounded)
Product: __________________________________
Room Name: ________________________________
Quantity: _____
Width: _______ by Height _______
Louver Color: _____________________________
PVC Back Color (optional): ________________
Mount: ________________ (inside or outside)
Stack Option: ________ (left, right, split)
Brackets: ____________ (regular, extension)
Valance: _______________ (none, 3 1/2", 7")
Valance Corners: _______ (squared, rounded)
Product: __________________________________
Room Name: ________________________________
Quantity: _____
Width: _______ by Height _______
Louver Color: _____________________________
PVC Back Color (optional): ________________
Mount: ________________ (inside or outside)
Stack Option: ________ (left, right, split)
Brackets: ____________ (regular, extension)
Valance: _______________ (none, 3 1/2", 7")
Valance Corners: _______ (squared, rounded)
Product: __________________________________
Room Name: ________________________________
Quantity: _____
Width: _______ by Height _______
Louver Color: _____________________________
PVC Back Color (optional): ________________
Mount: ________________ (inside or outside)
Stack Option: ________ (left, right, split)
Brackets: ____________ (regular, extension)
Valance: _______________ (none, 3 1/2", 7")
Valance Corners: _______ (squared, rounded)
Product: __________________________________
Room Name: ________________________________
Quantity: _____
Width: _______ by Height _______
Louver Color: _____________________________
PVC Back Color (optional): ________________
Mount: ________________ (inside or outside)
Stack Option: ________ (left, right, split)
Brackets: ____________ (regular, extension)
Valance: _______________ (none, 3 1/2", 7")
Valance Corners: _______ (squared, rounded)
Product: __________________________________
Room Name: ________________________________
Quantity: _____
Width: _______ by Height _______
Louver Color: _____________________________
PVC Back Color (optional): ________________
Mount: ________________ (inside or outside)
Stack Option: ________ (left, right, split)
Brackets: ____________ (regular, extension)
Valance: _______________ (none, 3 1/2", 7")
Valance Corners: _______ (squared, rounded)
1. Always use a steel tape measure.
2. Measure down to the eighth of an inch.
3. Remember that inside mounts have deductions taken by the factory.
4. For outside mounts you must add to the width and height. See instructions.
5. Measure width in three places & use smallest width.
6. Measure height in three places & use shortest height.
7. Width always comes first, then height.
8. Rounded Valance corners are only available on certain verticals and incur a surcharge.
9. One way draw recommended for sliding glass doors.
10. Valances on inside mounts are not flush with wall, they protrude into room about 1-2 inches and are about 2" wider.
11. Please read online measuring instructions for exact measuring instructions.
12. Also review the online installation instructions to get a feel for how horizontals mount.
Print this page